Best 50-Pint Dehumidifiers, Compared by Spec
Written by the Dehumidifier for Basement editorial team and reviewed for source accuracy. — last updated July 2026. Editorial policy · Report an error
Quick answer
A 50-pint (2019 DOE) unit covers roughly 4,000–4,500 sq ft per AHAM/manufacturer guidance in moderately damp conditions. Frigidaire, Midea, GE, Danby, and Honeywell all sell Energy Star certified 50-pint models in the $220–$300 range.
This is a spec-based comparison — we have not lab-tested these units; specs are from manufacturers and Energy Star.
What does a 50-pint rating mean under the 2019 DOE standard?
In 2019 the DOE changed how dehumidifier capacity is tested. A unit labeled 70-pint under the old (pre-2019) standard removes about the same water as a 50-pint unit under the new standard. Always check the label date or ask the retailer which standard was used before comparing two pint numbers.
Which 50-pint models are Energy Star certified?
| Model | Watts | Coverage | Noise | Price | Est. monthly cost |
|---|---|---|---|---|---|
| Frigidaire FFAD5033W1 | 480W | 4,500 sq ft | 50 dBA | $220–$250 | $18.43 |
| Midea Cube 50-Pint | 480W | 4,500 sq ft | 52 dBA | $260–$290 | $18.43 |
| GE APER50LZ | 500W | 4,500 sq ft | 51 dBA | $240–$270 | $19.20 |
| Honeywell TP50WK | 500W | 4,000 sq ft | 52 dBA | $230–$260 | $19.20 |
| Danby DDR050BJWDB | 490W | 4,000 sq ft | 52 dBA | $220–$250 | $18.82 |
Source: Manufacturer spec sheets; EIA $0.16/kWh
Frigidaire FFAD5033W1
- Manufacturer
- Frigidaire
- Model number
- FFAD5033W1
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 480 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket or gravity hose
- Built-in pump
- No
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 50 dBA (manufacturer claim)
- Price range
- $220–$250 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Full-tank alert and auto shutoff per spec sheet
- Lower listed price than the pump model
Limitations (from published specs)
- No built-in condensate pump — gravity drain only
- Manual bucket empties every 12+ hours in high humidity
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Frigidaire. Last verified 2026-07-29.
Midea Cube 50-Pint
- Manufacturer
- Midea
- Model number
- MAD50S1QWT
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 480 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Expandable reservoir, gravity hose, or pump on pump-equipped variant
- Built-in pump
- Available on the pump variant
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 52 dBA (manufacturer claim)
- Price range
- $260–$290 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Built-in pump option available per Midea spec sheet
- MSmart app connectivity listed for remote monitoring
Limitations (from published specs)
- Higher listed price than the base FFAD5033W1
- 52 dBA noise rating among the louder Energy Star units
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Midea. Last verified 2026-07-29.
GE APER50LZ
- Manufacturer
- GE Appliances
- Model number
- APER50LZ
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 500 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket, gravity hose, or built-in pump
- Built-in pump
- Yes — built-in pump
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 51 dBA (manufacturer claim)
- Price range
- $240–$270 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Built-in pump per GE spec sheet
- SmartHQ app connectivity for remote scheduling
Limitations (from published specs)
- Mid-pack noise rating at 51 dBA
- Price runs higher than non-connected competitors
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: GE Appliances. Last verified 2026-07-29.
Honeywell TP50WK
- Manufacturer
- Honeywell (JMATEK/AirTek licensee)
- Model number
- TP50WK
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 500 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket or gravity hose
- Built-in pump
- No
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,000 sq ft (manufacturer claim)
- Noise
- 52 dBA (manufacturer claim)
- Price range
- $230–$260 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Digital humidistat with 5% RH increments per manual
- Washable filter listed in spec sheet
Limitations (from published specs)
- 500W draw among the higher Energy Star 50-pint units
- Bucket capacity limited to 0.85 gallons per spec sheet
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Honeywell (JMATEK/AirTek licensee). Last verified 2026-07-29.
Danby DDR050BJWDB
- Manufacturer
- Danby
- Model number
- DDR050BJWDB
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 490 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket or gravity hose
- Built-in pump
- No
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,000 sq ft (manufacturer claim)
- Noise
- 52 dBA (manufacturer claim)
- Price range
- $220–$250 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Full-bucket auto shutoff per spec sheet
- Casters listed for portability between rooms
Limitations (from published specs)
- No built-in pump on this model per spec sheet
- 52 dBA is mid-to-loud for continuous basement use
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Danby. Last verified 2026-07-29.
Which 50-pint dehumidifier uses the least electricity?
Among the models listed, the Frigidaire FFAD5033W1 and Midea Cube 50-Pint carry the lowest listed wattage at 480W, which works out to about $18.43 per month on an 8-hour daily cycle at $0.16/kWh.
Is a 50-pint dehumidifier big enough for my space?
Manufacturer coverage claims for 50-pint units run 4,000–4,500 sq ft in moderate dampness. Very damp spaces reduce effective coverage — see our pint capacity explained guide.
Buying checklist for a 50-pint dehumidifier
- Verify 2019 DOE testing standard on the label or spec sheet
- Compare watts across models — a 100W difference changes monthly cost noticeably
- Check for Energy Star listing on the EPA site
- Decide gravity drain vs built-in pump
- Compare noise rating if used in a finished basement
Do 50-pint units cost much more to run than 30-pint units?
A 30-pint unit near 330W (like the Midea Cube 35-Pint at 330W) runs roughly $12.67/month at 8 hrs/day versus about $19.20/month for a 500W 50-pint unit — a real but modest difference at $0.16/kWh.
🔴 Get free quotes from local waterproofing and mold professionals
Describe the problem and a local, licensed contractor can give you a free on-site estimate. No obligation. Quotes come from independent contractors; we do not perform waterproofing, inspection or remediation work ourselves.
Demonstration form — no lead provider is connected yet, so nothing is transmitted or stored when you submit.
Frequently asked questions
Is 50 pints enough for a whole basement?+
For moderately damp basements up to about 4,000–4,500 sq ft per manufacturer coverage claims, yes. Larger or wetter spaces may need 70 pints.
What's the difference between old 70-pint and new 50-pint units?+
The 2019 DOE test standard lowered the rated numbers; an old 70-pint and new 50-pint often remove similar amounts of water. See our pint capacity explained page.
Are all 50-pint dehumidifiers Energy Star certified?+
No. Some, like the hOmeLabs HME020031N, are not listed on the Energy Star product finder. Always check the EPA list directly.
How much water does a 50-pint dehumidifier remove per day?+
Under lab test conditions per the 2019 DOE standard, up to 50 pints (about 6.25 gallons) per day at rated conditions; real-world removal varies with humidity and temperature.
Should I get a 50-pint or 70-pint model?+
Choose 70-pint for very damp, flood-prone, or larger basements. See whole-house vs portable for other options.
Keep reading
Sources and methodology
Guidance on this page is drawn from federal agencies and industry standards bodies rather than our own laboratory testing. We do not test appliances in a laboratory and we do not publish product measurements we did not obtain from the manufacturer or a government listing.
- U.S. Environmental Protection Agency — Mold Course & moisture control guidance (keep indoor relative humidity 30–50%)Used for: Target indoor relative humidity range and mold-growth conditions. Last verified 2026-07-29.
- U.S. Department of Energy — Energy Conservation Standards and Test Procedure for DehumidifiersUsed for: Why capacity ratings changed: the current federal test procedure and its rating conditions. Last verified 2026-07-29.
- ENERGY STAR (EPA) — ENERGY STAR Certified Dehumidifiers product finderUsed for: Certification status, Integrated Energy Factor (IEF) values, and sizing guidance for dehumidifiers. Last verified 2026-07-29.
- Association of Home Appliance Manufacturers (AHAM) — Dehumidifier certification program and sizing guidanceUsed for: Capacity-by-condition sizing ranges and certified capacity verification. Last verified 2026-07-29.
- U.S. Energy Information Administration — Electric Power Monthly — average retail price of electricity, residential sectorUsed for: Default electricity rate used in operating-cost estimates. Last verified 2026-07-29.
Written by the Dehumidifier for Basement editorial team and reviewed for source accuracy. Last updated July 2026. Found an error? Report it through our corrections policy.