Best Dehumidifiers With a Built-In Pump
Written by the Dehumidifier for Basement editorial team and reviewed for source accuracy. — last updated July 2026. Editorial policy · Report an error
Quick answer
The Frigidaire Gallery FGAC5044W1, Midea Cube 50-Pint (pump variant), GE APER50LZ, and Honeywell TP70WKN all list a built-in condensate pump per their manufacturer spec sheets, letting you drain upward to a sink without emptying a bucket.
This is a spec-based comparison — we have not lab-tested these units; specs are from manufacturers and Energy Star.
Why get a dehumidifier with a built-in pump?
A built-in pump pushes condensate upward through tubing, so you can drain to a sink, window, or floor drain that sits above the unit. Without a pump, you're limited to gravity drainage or manual bucket emptying. See condensate pump setup for install steps.
Which basement dehumidifiers have a built-in pump?
| Model | Capacity | Watts | Noise | Price | Est. monthly cost |
|---|---|---|---|---|---|
| Frigidaire Gallery FGAC5044W1 | 50 pint | 520W | 51 dBA | $260–$300 | $19.97 |
| Midea Cube 50-Pint | 50 pint | 480W | 52 dBA | $260–$290 | $18.43 |
| GE APER50LZ | 50 pint | 500W | 51 dBA | $240–$270 | $19.20 |
| Honeywell TP70WKN | 70 pint | 745W | 53 dBA | $300–$340 | $28.61 |
Source: Manufacturer spec sheets; EIA $0.16/kWh
Frigidaire Gallery FGAC5044W1
- Manufacturer
- Frigidaire
- Model number
- FGAC5044W1
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 520 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket, gravity hose, or built-in pump
- Built-in pump
- Yes — built-in pump
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 51 dBA (manufacturer claim)
- Price range
- $260–$300 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Built-in pump for upward drainage
- Energy Star certified per EPA listing
- Washable pre-filter
Limitations (from published specs)
- 520W rated draw is higher than some 35-pint models
- 51 dBA noise rating is audible in a quiet room
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Frigidaire. Last verified 2026-07-29.
Midea Cube 50-Pint
- Manufacturer
- Midea
- Model number
- MAD50S1QWT
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 480 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Expandable reservoir, gravity hose, or pump on pump-equipped variant
- Built-in pump
- Available on the pump variant
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 52 dBA (manufacturer claim)
- Price range
- $260–$290 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Built-in pump option available per Midea spec sheet
- MSmart app connectivity listed for remote monitoring
Limitations (from published specs)
- Higher listed price than the base FFAD5033W1
- 52 dBA noise rating among the louder Energy Star units
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Midea. Last verified 2026-07-29.
GE APER50LZ
- Manufacturer
- GE Appliances
- Model number
- APER50LZ
- Rated capacity
- 50 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 500 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket, gravity hose, or built-in pump
- Built-in pump
- Yes — built-in pump
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,500 sq ft (manufacturer claim)
- Noise
- 51 dBA (manufacturer claim)
- Price range
- $240–$270 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified
- Built-in pump per GE spec sheet
- SmartHQ app connectivity for remote scheduling
Limitations (from published specs)
- Mid-pack noise rating at 51 dBA
- Price runs higher than non-connected competitors
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: GE Appliances. Last verified 2026-07-29.
Honeywell TP70WKN
- Manufacturer
- Honeywell (JMATEK/AirTek licensee)
- Model number
- TP70WKN
- Rated capacity
- 70 pint (current DOE test procedure)
- ENERGY STAR
- Listed as ENERGY STAR certified on the ENERGY STAR product finder
- Integrated Energy Factor
- Not published by the manufacturer.
- Power draw
- 745 W (manufacturer specification)
- Operating temperature
- 41°F–95°F (manufacturer specification)
- Drainage methods
- Bucket, gravity hose, or built-in pump
- Built-in pump
- Yes — built-in pump
- Dimensions
- Not published by the manufacturer.
- Weight
- Not published by the manufacturer.
- Warranty
- Not published by the manufacturer.
- Manufacturer-stated coverage
- Up to 4,000 sq ft in higher-moisture spaces (manufacturer claim)
- Noise
- 53 dBA (manufacturer claim)
- Price range
- $300–$340 (subject to change)
- Availability
- Widely available
Strengths (from published specs)
- Energy Star certified at the higher 70-pint tier
- Built-in pump per manufacturer listing
- Larger rated capacity for extremely damp basements
Limitations (from published specs)
- 745W draw raises monthly running cost versus 50-pint units
- 53 dBA is on the louder end of Energy Star listings
Affiliate link — we may earn a commission at no extra cost to you. Price subject to change. Specification source: Honeywell (JMATEK/AirTek licensee). Last verified 2026-07-29.
Do pump models cost more to run?
Pump models typically draw slightly more wattage than gravity-only versions of the same capacity because the pump motor adds load. The Frigidaire FFAD5033W1 (no pump, 480W) runs about $18.43/month versus the Gallery FGAC5044W1 (with pump, 520W) at about $19.97/month.
How does pump drainage compare to gravity drainage?
Gravity drainage requires a drain lower than the unit's outlet — often not available in a basement. A pump lets tubing run upward several feet to a laundry sink. See continuous drain setup for both methods.
Installation checklist for a pump dehumidifier
Tools needed
- Vinyl tubing sized to the unit's pump outlet
- Zip ties or clamp
- Level
- 1Confirm outlet heightCheck the manufacturer's max pump lift height in the spec sheet — most residential pumps list 10–15 feet.
- 2Route tubingRun tubing from the pump outlet to the drain point, avoiding sharp kinks.
- 3Secure connectionsClamp tubing to the barbed fitting to prevent leaks under pump pressure.
- 4Test runAdd water to the reservoir manually and confirm the pump activates and drains fully.
🔴 Get free quotes from local waterproofing and mold professionals
Describe the problem and a local, licensed contractor can give you a free on-site estimate. No obligation. Quotes come from independent contractors; we do not perform waterproofing, inspection or remediation work ourselves.
Demonstration form — no lead provider is connected yet, so nothing is transmitted or stored when you submit.
Frequently asked questions
How high can a dehumidifier pump push water?+
Manufacturer spec sheets for these models typically list a maximum vertical lift of 10–15 feet; check your specific model before installing.
Do pump dehumidifiers need a bucket too?+
Most pump models still have an internal reservoir the pump draws from, but you don't need to manually empty it if the drain line is connected.
Is a pump dehumidifier louder than a standard one?+
Per spec sheets, pump models in this comparison list 51–53 dBA, similar to non-pump models in the same capacity class.
Can I add a separate condensate pump to a non-pump dehumidifier?+
Yes, external condensate pumps are sold separately. See condensate pump setup.
Are pump dehumidifiers more expensive?+
Yes, based on listed prices here, pump models run roughly $20–$50 more than comparable non-pump models.
Keep reading
Sources and methodology
Guidance on this page is drawn from federal agencies and industry standards bodies rather than our own laboratory testing. We do not test appliances in a laboratory and we do not publish product measurements we did not obtain from the manufacturer or a government listing.
- U.S. Environmental Protection Agency — Mold Course & moisture control guidance (keep indoor relative humidity 30–50%)Used for: Target indoor relative humidity range and mold-growth conditions. Last verified 2026-07-29.
- U.S. Department of Energy — Energy Conservation Standards and Test Procedure for DehumidifiersUsed for: Why capacity ratings changed: the current federal test procedure and its rating conditions. Last verified 2026-07-29.
- ENERGY STAR (EPA) — ENERGY STAR Certified Dehumidifiers product finderUsed for: Certification status, Integrated Energy Factor (IEF) values, and sizing guidance for dehumidifiers. Last verified 2026-07-29.
- Association of Home Appliance Manufacturers (AHAM) — Dehumidifier certification program and sizing guidanceUsed for: Capacity-by-condition sizing ranges and certified capacity verification. Last verified 2026-07-29.
- U.S. Energy Information Administration — Electric Power Monthly — average retail price of electricity, residential sectorUsed for: Default electricity rate used in operating-cost estimates. Last verified 2026-07-29.
Written by the Dehumidifier for Basement editorial team and reviewed for source accuracy. Last updated July 2026. Found an error? Report it through our corrections policy.